{"id":302,"date":"2026-08-24T11:30:52","date_gmt":"2026-08-24T03:30:52","guid":{"rendered":"https:\/\/microductconnector.com\/product\/7-ways-1210-mm-with-pe-sheath-3-4mm-direct-buried-db-hdpe-micro-duct-tube-bundle-for-air-blowing-cable-installation-project-product\/"},"modified":"2026-09-03T09:33:38","modified_gmt":"2026-09-03T09:33:38","slug":"7-ways-1210-mm-with-pe-sheath-3-4mm-direct-buried-db-hdpe-micro-duct-tube-bundle-for-air-blowing-cable-installation-project-product","status":"publish","type":"product","link":"https:\/\/microductconnector.com\/bs\/product\/7-ways-1210-mm-with-pe-sheath-3-4mm-direct-buried-db-hdpe-micro-duct-tube-bundle-for-air-blowing-cable-installation-project-product\/","title":{"rendered":"7 na\u010dina 12\/10 mm DB HDPE cijev"},"content":{"rendered":"

Detalji o proizvodu<\/h2>\n

\tZhejiang Oulu Automatic Equipment Co., Ltd.<\/span><\/p>\n

Kratki opis:<\/h3>\n
\n
Essential details<\/div>\n
\n
\n
Model Number:7 Ways 12\/10mm DB Tube Bundle<\/dt>\n<\/dl>\n
\n
Type:Tube bundle<\/dt>\n<\/dl>\n
\n
Place of Origin:Shanghai, China<\/dt>\n<\/dl>\n
\n
Marka:ANMASPC<\/dt>\n<\/dl>\n
\n
Use:FTTH<\/dt>\n<\/dl>\n
\n
Warranty Time:12months<\/dt>\n<\/dl>\n
\n
Network:None<\/dt>\n<\/dl>\n
\n
Sub duct Inner diameter:10mm<\/dt>\n<\/dl>\n
\n
Sub duct outer diameter:12mm<\/dt>\n<\/dl>\n
\n
PE Sheath:3.4mm<\/dt>\n<\/dl>\n
\n
Outer Diameter::42.8mm (\u00b11.1mm)<\/dt>\n<\/dl>\n
\n
Melt flow index:0.1 ~ 0.4 g\/10 minutes<\/dt>\n<\/dl>\n
\n
Density:Min. 0.940 g\/cm3<\/dt>\n<\/dl>\n
\n
Tensile strength at yield:Min. 20MPa<\/dt>\n<\/dl>\n
\n
Elongation at the break:Min 350%<\/dt>\n<\/dl>\n
\n
Environmental stress crack resist (F50):Min. 96 hours<\/dt>\n<\/dl>\n
\n
Storage temperature:-40\u00b0C ~ +70\u00b0C<\/dt>\n<\/dl>\n<\/div>\n
\n
Supply Ability\uff1a1000000 Piece\/Pieces per Day<\/div>\n<\/div>\n

\u00a0<\/p>\n

\u00a0<\/p>\n

\u00a0<\/p>\n<\/p>\n<\/div>\n

<\/p>\n

  • \nFOB cijena: <\/em> US $0.5 – 9,999 \/ Piece <\/li>\n
  • \nMinimalna koli\u010dina narud\u017ebe: <\/em> 100 komada<\/li>\n
  • \nSposobnost snabdijevanja: <\/em> 10000 komada mjese\u010dno<\/li>\n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n<\/div><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n\t\t\t\t\"7\n<\/div>\n<\/p><\/div>\n<\/div>\n

    7 WAYS<\/span><\/h3>\n
    \n
    \n
    \n
    \n
    \n
    \n
    A bundle of micro- or mini-tubes (regular wall size) is surrounded by dual HDPE sheath. The design makes the duct assemblies suitable for outdoor direct bury application. The inner micro ducts are optimized for best cable blowing performance.<\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
    \n
    \n
    \n

    Sirovine<\/span><\/h3>\n
    \n
    \n
    HDPE of a high-molecular type with the following parameters is used for production of the Tube Bundle: – Melt flow index: 0.1 \uff5e 0.4 g\/10 minutes EN ISO 1133 – Density: Min. 0.940 g\/cm3 ISO 1183 – Tensile strength at yield: Min. 20MPa ISO 527 – Elongation at the break: Min 350% ISO 527 – Environmental stress crack resist (F50) Min. 96 hours ISO 4599<\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
    \n
    \n\n\n\n\n\n\n\n\n
    \n
    Pozicija.<\/span><\/div>\n<\/td>\n
    		\n
    Mehani\u010dke performanse<\/span><\/div>\n<\/td>\n
    		\n
    Uslovi testa<\/span><\/div>\n<\/td>\n
    		\n
    Performanse<\/span><\/div>\n<\/td>\n
    		\n
    Standardno<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    1<\/span><\/div>\n<\/td>\n
    		\n
    \u010cvrsto\u0107a na vu\u010du
    \npri prinosu<\/span><\/div>\n<\/td>\n
    		\n
    Stopa pro\u0161irenja:
    \n100 mm\/min<\/span><\/div>\n<\/td>\n
    		\n
    \u2265620N<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2
    \nMetoda E1<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    2<\/span><\/div>\n<\/td>\n
    		\n
    Smrskaj<\/span><\/div>\n<\/td>\n
    		\n
    Du\u017eina uzorka: 250 mm
    \nLoad: 380N
    \nTrajanje maksimalnog optere\u0107enja: 1 minuta
    \nVrijeme oporavka: 1 sat<\/span><\/div>\n<\/td>\n
    		\n
    Vanjski i unutra\u0161nji promjer moraju biti vidljivi pri vizualnom pregledu bez o\u0161te\u0107enja i bez smanjenja promjera ve\u0107eg od 15%.<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2
    \nMetoda E3<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    3<\/span><\/div>\n<\/td>\n
    		\n
    Perverzija<\/span><\/div>\n<\/td>\n
    		\n
    \u2264120mm<\/span><\/div>\n<\/td>\n
    		\n
    –<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2
    \nMetoda E10<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    4<\/span><\/div>\n<\/td>\n
    		\n
    Uticaj<\/span><\/div>\n<\/td>\n
    		\n
    Radijus povr\u0161ine udara: 10 mm
    \nUdarna energija: 1 J
    \nBroj udaraca: 3 puta
    \nVrijeme oporavka: 1 sat<\/span><\/div>\n<\/td>\n
    		\n
    Prilikom vizuelnog pregleda ne smije biti o\u0161te\u0107enja mikrodrena.<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2
    \nMetoda E4<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    5<\/span><\/div>\n<\/td>\n
    		\n
    Radijus savijanja<\/span><\/div>\n<\/td>\n
    		\n
    Broj okretaja: 5
    \nMandrel diameter:144mm.
    \nBroj ciklusa: 3<\/span><\/div>\n<\/td>\n
    		\n
    Vanjski i unutra\u0161nji promjer moraju biti vidljivi pri vizualnom pregledu bez o\u0161te\u0107enja i bez smanjenja promjera ve\u0107eg od 15%.<\/span><\/div>\n<\/td>\n
    		\n
    IEC 60794-1-2
    \nMetoda E11<\/span><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
    \n
    \n\n\n\n\n\n\n\n\n
    \n
    Pozicija.<\/span><\/div>\n<\/td>\n
    		\n
    Stavka<\/span><\/div>\n<\/td>\n
    		\n
    Specifikacija<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    1<\/span><\/div>\n<\/td>\n
    		\n
    Izgled<\/span><\/div>\n<\/td>\n
    		\n
    Glatki vanjski zid (UV-stabiliziran) bez vidljivih ne\u010disto\u0107a; dobro odmjerenu boju, bez mjehuri\u0107a ili pukotina; s definiranim oznakama
    \nna vanjskom zidu.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    2<\/span><\/div>\n<\/td>\n
    		\n
    \u010cvrsto\u0107a na vu\u010du<\/span><\/div>\n<\/td>\n
    		\n
    Koristite Pull \u010darape za zatezanje uzorka u skladu sa tabelom ispod:
    \nDu\u017eina uzorka: 1 m
    \nBrzina vu\u010denja: 20 mm\/min
    \nLoad: 6800N
    \nTrajanje napetosti: 5 min.<\/span><\/div>\n<\/td>\n
    		\n
    Nema vidljivog o\u0161te\u0107enja niti preostale deformacije ve\u0107e od 151 TP3T vanjskog pre\u010dnika sklopljenog kanala.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    3<\/span><\/div>\n<\/td>\n
    		\n
    Otpornost na drobljenje<\/span><\/div>\n<\/td>\n
    		\n
    Uzorak od 250 mm nakon 1 minute vremena optere\u0107enja i 1 sata vremena oporavka. Optere\u0107enje (plo\u010da) treba biti 2000 N. Oznaka plo\u010de na
    \nOvojnica se ne smatra mehani\u010dkom o\u0161te\u0107enjem.<\/span><\/div>\n<\/td>\n
    		\n
    Nema vidljivog o\u0161te\u0107enja niti preostale deformacije ve\u0107e od 151 TP3T vanjskog pre\u010dnika sklopljenog kanala.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    4<\/span><\/div>\n<\/td>\n
    		\n
    Uticaj<\/span><\/div>\n<\/td>\n
    		\n
    Striking surface radius shall be 10mm and impact energy 10J. Recovery time shall be one out. The imprint of the striking surface
    \non the microduct is not considered as mechanical damage.<\/span><\/div>\n<\/td>\n
    		\n
    Nema vidljivog o\u0161te\u0107enja niti preostale deformacije ve\u0107e od 151 TP3T vanjskog pre\u010dnika sklopljenog kanala.<\/span><\/div>\n<\/td>\n<\/tr>\n
    \n
    5<\/span><\/div>\n<\/td>\n
    		\n
    Savijanje<\/span><\/div>\n<\/td>\n
    		\n
    Promjer mandrila treba biti 40\u00d7 vanjski promjer uzorka, 4 navoja, 3 ciklusa.<\/span><\/div>\n<\/td>\n
    		\n
    Nema vidljivog o\u0161te\u0107enja niti preostale deformacije ve\u0107e od 151 TP3T vanjskog pre\u010dnika sklopljenog kanala.<\/span><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
    \n
    \n
    \n
    \n
    \n
    Completed packages of the HDPE Tube Bundle on drums can be stored outdoor max. 6 months upon the date of production. Storage temperature: -40\u00b0C \uff5e +70\u00b0C Installation temperature: -30\u00b0C \uff5e +50\u00b0C Operating temperature: -40\u00b0C \uff5e +70\u00b0C<\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    \n
    Essential details<\/div>\n
    \n
    \n
    Model Number:7 Ways 12\/10mm DB Tube Bundle<\/dt>\n<\/dl>\n
    \n
    Type:Tube bundle<\/dt>\n<\/dl>\n
    \n
    Place of Origin:Shanghai, China<\/dt>\n<\/dl>\n
    \n
    Marka:ANMASPC<\/dt>\n<\/dl>\n
    \n
    Use:FTTH<\/dt>\n<\/dl>\n
    \n
    Warranty Time:12months<\/dt>\n<\/dl>\n
    \n
    Network:None<\/dt>\n<\/dl>\n
    \n
    Sub duct Inner diameter:10mm<\/dt>\n<\/dl>\n
    \n
    Sub duct outer diameter:12mm<\/dt>\n<\/dl>\n
    \n
    PE Sheath:3.4mm<\/dt>\n<\/dl>\n
    \n
    Outer Diameter::42.8mm (\u00b11.1mm)<\/dt>\n<\/dl>\n
    \n
    Melt flow index:0.1 ~ 0.4 g\/10 minutes<\/dt>\n<\/dl>\n
    \n
    Density:Min. 0.940 g\/cm3<\/dt>\n<\/dl>\n
    \n
    Tensile strength at yield:Min. 20MPa<\/dt>\n<\/dl>\n
    \n
    Elongation at the break:Min 350%<\/dt>\n<\/dl>\n
    \n
    Environmental stress crack resist (F50):Min. 96 hours<\/dt>\n<\/dl>\n
    \n
    Storage temperature:-40\u00b0C ~ +70\u00b0C<\/dt>\n<\/dl>\n<\/div>\n
    Supply Ability\uff1a1000000 Piece\/Pieces per Day<\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

    Zhejiang Oulu Automatic Equipment Co., Ltd. Short Description: Essential details Model Number:7 Ways 12\/10mm DB Tube Bundle Type:Tube bundle Place of Origin:Shanghai, China Brand Name:ANMASPC Use:FTTH Warranty Time:12months Network:None Sub duct Inner diameter:10mm Sub duct outer diameter:12mm PE Sheath:3.4mm Outer Diameter::42.8mm (\u00b11.1mm) Melt flow index:0.1 ~ 0.4 g\/10 minutes Density:Min. 0.940 g\/cm3 Tensile strength at yield:Min. 20MPa Elongation at the break:Min 350% Environmental stress crack resist (F50):Min. 96 hours Storage temperature:-40\u00b0C ~ +70\u00b0C Supply Ability\uff1a1000000 Piece\/Pieces per Day \u00a0 \u00a0 \u00a0 FOB Price: US $0.5 – 9,999 \/ Piece Min.Order Quantity: 100 Piece\/Pieces Supply Ability: 10000 Piece\/Pieces per Month<\/p>","protected":false},"featured_media":303,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[],"product_cat":[18],"product_tag":[],"class_list":["post-302","product","type-product","status-publish","has-post-thumbnail","product_cat-hdpe-microducts","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/microductconnector.com\/bs\/wp-json\/wp\/v2\/product\/302","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/microductconnector.com\/bs\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/microductconnector.com\/bs\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/microductconnector.com\/bs\/wp-json\/wp\/v2\/comments?post=302"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/microductconnector.com\/bs\/wp-json\/wp\/v2\/media\/303"}],"wp:attachment":[{"href":"https:\/\/microductconnector.com\/bs\/wp-json\/wp\/v2\/media?parent=302"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/microductconnector.com\/bs\/wp-json\/wp\/v2\/product_brand?post=302"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/microductconnector.com\/bs\/wp-json\/wp\/v2\/product_cat?post=302"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/microductconnector.com\/bs\/wp-json\/wp\/v2\/product_tag?post=302"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}