Mikro zaustavljači na kraju kanala

Microduct end stops for protecting open telecom tubes

These microduct end stops are presented for terminating open-ended tubes and helping avoid air leakage and the ingress of water or other material.

Supplier data lists transparent push-fit bodies, preassembled safety clips, a maximum working pressure of 25 bar and FPF sizes from 3–20 mm outside diameter. Historic price, MOQ and supply figures are not treated as current commitments.

Key details

							Komponente
							1	Koleta		POM
							2	Kvačica za zaključavanje		POM
							3	Patron		Legura cinka
							4	Kandža-zaključavanje		SUS301/304
							5	Prsten za podršku		POM
							6	Prsten zapečaćen		TEP
							7	Tijelo		PC2807
Fit cijev
Materijal cijevi						HDPE、PE、Nylon、Polyurethane
Vanjski promjer cijevi						Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ10,Φ12,Φ16,Φ18,Φ20
Technical Parameter
Rad sa tečnostima						Zrak
Zategnutost						0.15~0.8 MPa bez curenja
Test vučenja						400N
Dokazni pritisak						2,5 MPa
Raspon radnog pritiska						0~1,6 MPa
Ambijentalna temperatura i temperatura tečnosti						-40~60℃
Radna temperatura						-10℃/+50℃
Preporučena temperatura duvanja						-15℃/+35℃
Stepen zaštite						IP68
UV-otporni razred						F1
Sila umetanja						50N max (5kg)
Trajanje života:						25 godina
Standardi:						EN 50411-2-8
Specifikacije i dimenzije
ANMASPC kod						Vanjski promjer / unutrašnji promjer
FPF3						3
FPF4						4
FPF5						5
FPF6						6
FPF7						7
FPF8						8
FPF10						10
FPF12						12
FPF14						14
FPF16						16
FPF18						18
FPF20						20

Specifying an end stop for a telecom tube

Use these checkpoints to prepare a product-specific enquiry and avoid selecting by a general trade name alone.

1. Confirm the tube: Measure the outside diameter and identify the matching FPF version, including the 14 mm option when relevant.
2. State the route condition: Describe the open-tube location, exposure and planned period of closure.
3. Define testing: Provide the required pressure or sealing test rather than relying on a generic end-stop description.
4. Refresh commercial data: Request a current quotation for MOQ, price, packing, capacity and lead time.

OEM I PROJEKTNE MOGUĆNOSTI

Sposobnost kompanije za snabdijevanje u telekomunikacijama

Oulu Automatic Equipment predstavlja se kao dobavljač konektora za mikrocijevi, HDPE sistema mikrocijevi, dodatne opreme za uvlačenje kablova i pneumatskih spojnica za telekomunikacione izvođače, distributere i OEM partnere.

Istražite mogućnosti kompanije

B2B PODRŠKA U NABAVCI

Podrška za B2B nabavku

The supplier’s Service page describes support from product consultation and customized solutions through production, delivery and after-sales. For a product-specific enquiry, include:

• Measure the outside diameter and identify the matching FPF version, including the 14 mm option when relevant.
• Target quantity by size or model, sample needs, mixed specifications and packing preference.
• Project drawings, pressure or sealing requirements, and required compliance or export documents.
• Current MOQ, payment, freight, sample timing and production timing to be confirmed in the quotation.

Company-level service statements and commercial terms should be reconfirmed for the selected product and order.

Podijelite dimenzije, uslove rute i količine za ponudu specifičnu za proizvod.
Pošaljite zahtjeve za proizvod

SLIKE DETALJA PROIZVODA

Detalji o proizvodu

Često postavljana pitanja

What are microduct end stops used for?

They terminate open telecom tubes and are described as helping reduce air leakage and water or material ingress.

What are the standard sizes of microducts?

Microduct sizes vary. This end-stop family publishes FPF3–FPF20 versions for 3–20 mm outside diameter.

Is there a 14 mm microduct end stop?

The published range includes an FPF14 version for a 14 mm outside diameter. Confirm the measured tube and dimensional drawing before ordering.

How are push-fit tube end stops secured?

The supplier describes a push-fit construction with a preassembled safety clip. Confirm insertion and removal instructions for the selected size.

What pressure can these micro duct end stops handle?

The supplier publishes a maximum working pressure of 25 bar. Confirm the relevant test conditions for the installation.

Are the listed MOQ and price still valid?

Historic commercial figures appear in the source content, but they are not presented as current commitments. Request a current quotation for price, MOQ, capacity and lead time.